A worlds first! Pixel FlexLED individually controlled and individually cuttable in 12VDC. 2700k, 6500k and Amber (595nm) all-in-one high CRI LED chip designed for beautiful colour rendering and chase effects.
This Pixel FlexLED operating 12 VDC allows for longer runs of LED while still allowing for dazzling effects and endless possibilities.
Control these strips with our PixlArt 416 controller via ArtNet or sACN data signals.
Suitable for on-camera use and flicker-free up to 240 fps at most camera settings. 8KHZ operating frequency.
Pixel Product Installation Notes:
The PWM frequency (dimming frequency) is baked into the pixel and cannot be changed. You must ensure you choose the right pixel strip for your application. If you are unsure of what camera settings are going to be in use, it is best to go with high frequency pixel tape (8khz or higher / GS8208 or APA102)
The power supply that is powering the controller (PixlArt416) does not need to be the same power supply that is powering the LED strip. In that case you should not connect the controller output + to the strip +.
During testing ensure that the pixel strip is receiving the required voltage by checking the +/- voltage along the LED strip.
Soldering Guidelines:
Soldering iron should be between 360°C and 372°C. Please ensure not to heat each solder pad for longer than 3 seconds otherwise separation of the solder pads can occur.
Other Notes:
Indoor and weatherproof strips have double-sided tape on the back which makes installation as easy as peel n stick.
Waterproof strips require mounting via silicone glue or mechanical hardware
Controller, power supply and extension cables are sold separately based on your project
Quantity discounts available
Custom colour temperatures, pixel densities, and PCB colour are available
Please contact us for more information
Pricing is for 5 meters (16.4')
SPECIFICATIONS - INDOOR PRODUCT
| Product Type | : | 60 LED/meter |
| Product Code | : | I12VW300GS8208-B |
| CRI | : | 95+ |
| Kelvin | : | 2700k & 6500k & Amber (595nm) |
| PCB Color | : | Black |
| Current, Rating | : | 1.2 A / meter |
| Nominal Voltage | : | 12 VDC |
| Voltage Range | : | 10 ~ 14 VDC |
| Wattage | : | 14.4 W / meter |
| CC / CV | : | Constant Current |
| IP Rating | : | IP43 |
| Lumens @ Full | : | TBD |
| Lumen / Watt | : | TBD |
| Lifetime* | : | 40,000 hours |
| Cutting Length | : | 1.6CM, Individual LED |
| LED Quantity | : | 60 LED / meter |
| Number of Contacts | : | 4 |
| LED Type | : | GS8208 |
| Copper Quantity | : | 3 Oz. |
| Temperature, Operating, Maximum | : | 70° C |
| Temperature, Operating, Minimum | : | -40° C |
| Agency Ratings | : | UL - E489028, CE, RoHS |
| PCB Width | : | 10 MM |
| Maximum Recommended Length | : | 5 meters |
| Viewing Angle | : | 120 degree |
| Adhesion | : | SCX 040 500 |
| Wavelength A | : | 2700k |
| Wavelength B | : | 6500k |
| Wavelength C | : | 595nm |
| Wavelength D | : | N/A |
| Data Transmission Speed | : | 800 kHZ |
| Refresh Rate | : | 30 FPS |
| Bit Rate | : | 48 Bit |
| Data Clock Frequency | : | N/A |
| PWM Dimming Frequency | : | 8 KHZ |
*nominal lifetime - dependent on installation location
Specification Sheet
UL Certificate of Compliance