OVERSTOCK ITEMS

10" Round Aluminum LED Panel

$146.83 CAD

• High output rigid LED panel with excellent output with only a 42W draw
• Rigid aluminum panel acts as a heat-sink and protects longevity of LEDs
• Center hole on panel allows for easy mounting

24V Battery Holder

$10.15 CAD

2 X 23A / A23 Battery Holder

24V Battery Pack

Holds (2) 23A 12V Batteries and outputs 24V DC

Powers 10 centimeters of FlexLED 24V 14.4 W/Meter (Tungsten/Daylite/RGB) for approximately 2 hours.

Please note this unit is not rechargeable and batteries are sold separately.

DMX Dimmer 3 / 4 Channel 16-Bit

$83.42 CAD

*THIS MODEL IS DISCONTINUED - LIMITED QUANTITY REMAINING*

This 3-Channel Controller can be used with all of our FlexLED Tape lines and Modules

• Uses terminal blocks to control LEDs via any lighting console or through computer software
• Can create over 16 million colours when used with our Colourful (RGB) FlexLED Tape
• LCD Menu readout allows for adjustments from 8-bit mode to 16-bit mode and addressing properties.

Technical Parameters

• Working temperature: -20-60
• Supply voltage: 5V,12-24V
• Output: 3 channel OR 4 channel
• External dimension: L165*W68*H40mm
• Packing size: L180*W95*H60mm
• Net weight: 320g
• Gross weight: 355g
• Output current: each channel 4A
• Output power: 5V:<60W, 12V:<144W, 24V:<288W

**Connector Tails Not Included**

Dual-Quad-LED DMX Dimmer

$266.99 CAD

This controller can be used with all of our FlexLED Tape products and Modules

• This unit is beefy! 5A X 24 Channel = MAX 120A!
• 24 Channel DMX Decoder - 16 Bit - High Current.
• This unit converts DMX-512/1990 standard digital signal into 24 dimmable channels.
• Uses RJ45 Ethernet or 5-pin XLR connectors to control LEDs via any lighting console or through computer software.
• Can create over 16 million colors when used with our Colorful (RGBA or RGBW or RGB OR Bi-Color OR White) FlexLED Tape.
• Dip Switch No. 10 is Termination for DMX.
• Dip Switch No. 11 is Frequency Option (500Hz or 5kHz).
• Dip Switch No. 12 is Bit-Rate Option 16 Bit or 8 Bit.

Technical Parameters

• Supply Voltage: 12V - 24V DC
• Output: 24 Channels
• Output Current: 24 CH @ 5A/CH = Max 120A
• Output Power: 1440W @ 12V / 2880W @ 24V
• PWM Frequency: 500Hz OR 5000Hz (5KHz)
• Signal Isolation: > 1000V
• Bit Rate: 8 Bit & 16 Bit
• External Dimension (mm): L290*W122*H33
• Gross Weight: 920g
• Working Temperature: 0C to +70C
• IP Rating: IP40

**Connector Tails Not Included**

Edison Plug - HBL8115V

$14.21 CAD

RAD Wireless DMX 512 Transmitter / Receiver Wireless DMX Male

$64.79 CAD

The Wireless DMX can be used with all of our FlexLED Tape lines in conjunction with a DMX Controller

• Incredible range between the transmitter and receiver - more than the length of a professional ice-rink!
• The Transmitter and Receiver are each powered by a 5VDC transformer
• Control FlexLED Tape remotely using either a lighting console or computer
• Sold as 1 unit. Please order 2 for transmitter and receiver.

Technical Specifications:

• Tri-Colour LED Display
• 126 Channels Jumping Frequencies - High Anti-Jamming Capabilities
• 7 Groups ID Code Setting
• User can use 7 groups individual wireless net without any interference in the same location
• Input Voltage: 5VDC 500mA
• Communication Distance: 400 Meters (Visible Distance - actual distance may vary due to environmental conditions)
• Working Frequency: 2.4 Ghz ISM, 126 Channels
• Max Transmitting Power: 20dBm
• Receiver Sensitivity: -94dBm
• Signal Port: XLR 3-Pin Male Plug

Single Channel Rotary Dimmer

$19.94 CAD

For use with any of our White Flex LED Tape

• Dimmer for any low voltage LEDs.
  
• Easily mountable using the four built-in screw holes.
• 8KHz option for on-camera use.

Technical Parameters

• Supply Voltage: 12V - 24V DC
• Output: 1 Channel
• Outpur Current: 1 CH @ 8A/CH = MAX 8A
• Output Power: 96W @ 12V / 192W @ 24V
• PWM Frequency: 2KHz / 8KHz
• Dimensions (mm): L88*W60*H35
• Weight: 58g
• Working Temperature: -20C to 60C

**Connector Tails Not Included**

Three Channel RGB Rotary Dimmer

$29.15 CAD

For use with any of our Colorful (RGB) Flex LED Tape

• 3 Hi-Precision Rotary knobs provides the ability to create any color.
• Easily mountable using the built-in screw holes.
• 8KHz option for on-camera use.

Technical Parameters

• Supply Voltage: 12V - 24V DC
• Output: 3 Channel
• Outpur Current: 3 CH @ 8A/CH = MAX 18A
• Output Power: 144W @ 12V / 288W @ 24V
• PWM Frequency: 2KHz / 8KHz
• Dimensions (mm): L130*W40*H52
• Weight: 95g
• Working Temperature: -20C to 60C

**Connector Tails Not Included**

Trimline RGB Wireless Controller Trimline RGB Wireless Controller

$5.98 CAD $29.99 CAD

The Trimline RGB Wireless Controller is used with our Colourful (RGB) FlexLED Tape

• This controller boasts seven preset colour options, including white
• Blinking and Fading chase functions are included
• Speed is adjustable so that the chase functions can range from a 'dance party' strobe to a seamless blend and subtle change of colours