FREE SHIPPING IN CANADA OVER $199 - 1-800-924-1585 - INFO@MOSSLED.COM
FREE SHIPPING IN CANADA OVER $199 - 1-800-924-1585 - INFO@MOSSLED.COM
Skip to content

Pixel FlexLED 12V RGB High Frequency Individual Chip Control

SKU I12VRGB240GS8208-B
by MossLED
$157.85
IP Rating
Pixel Density
Connector Type
Availability: Translation missing: en.general.icons.icon_check_circle icon 210 in stock, ready to be shipped

48 & 60 & 72 & 96 LED/Meter RGB PixelFlex LED Tape in 12V DC

A worlds first! Pixel FlexLED individually controlled and individually cuttable in 12VDC.
This Pixel FlexLED operating 12 VDC allows for longer runs of LED while still allowing for dazzling effects and endless possibilities.
Control these strips with our PixlArt 416 controller via ArtNet or sACN data signals.
Suitable for on-camera use and flicker-free up to 240 fps at most camera settings. 8KHZ operating frequency.

Pixel Product Installation Notes:

  • The PWM frequency (dimming frequency) is baked into the pixel and cannot be changed.  You must ensure you choose the right pixel strip for your application.  If you are unsure of what camera settings are going to be in use, it is best to go with high frequency pixel tape (8khz or higher / GS8208 or APA102)
  • Avoid voltage drop by positioning a power supply close to the LED strip and/or powering the LED strip from multiple locations (or via multiple power supplies)
  • The power supply that is powering the controller (PixlArt416) does not need to be the same power supply that is powering the LED strip. In that case you should not connect the controller output + to the strip +.
  • During testing ensure that the pixel strip is receiving the required voltage by checking the +/- voltage along the LED strip.
  • Wiring: Red=+ / Black=- / Yellow=D1 / Green=D2 as below: if strip is connected to controller: D1=Data, D2=-. If it is connected to a previous strip: D1 to D1 and D2 to D2 from previous strip.


Soldering Guidelines:

Soldering iron should be between 360°C and 372°C.  Please ensure not to heat each solder pad for longer than 3 seconds otherwise separation of the solder pads can occur.

Other Notes:

  • Indoor and weatherproof strips have 3M double-sided tape on the back which makes installation as easy as peel n stick.
  • Waterproof strips require mounting via silicone glue or mechanical hardware
  • Controller, power supply and extension cables are sold separately based on your project
  • Quantity discounts available
  • Custom colour temperatures, pixel densities, and PCB colour are available
  • Please contact us for more information

Pricing is for 5 meters (16.4')

SPECIFICATIONS - INDOOR PRODUCT 

Product Type : 48 LED/meter 60 LED/meter 72 LED/meter 96 LED/meter
Product Code : I12VRGB240GS8208-B I12VRGB300GS8208-B I12VRGB360GS8208-B I12VRGB480GS8208-B
CRI : N/A N/A N/A N/A
Kelvin : N/A N/A N/A N/A
PCB Color : Black Black Black Black
Current, Rating : 0.6 A / meter 0.68 A / meter 0.9 A / meter 1.2 A / meter
Nominal Voltage : 12 VDC 12 VDC 12 VDC 12 VDC
Voltage Range : 10~ 14 VDC 10~ 14 VDC 10 ~ 14 VDC 10 ~ 14 VDC
Wattage : 6.5 W / meter 8.15 W / meter 9.8 W / meter 13 W / meter
CC / CV : Constant Voltage Constant Voltage Constant Voltage Constant Voltage
IP Rating : IP43 IP43 IP43 IP43
Lumens @ Full : 488 lm / meter 611 lm / meter 735 lm / meter 975 lm / meter
Lumen / Watt : 75 75 75 75
Lifetime* : 40,000 hours 40,000 hours 40,000 hours 40,000 hours
Cutting Length : 2.084cm, Individual LED 1.667cm, Individual LED 1.389cm, Individual LED 1.042cm, Individual LED
LED Quantity : 48 LED / meter 60 LED / meter 72 LED / meter 96 LED / meter
Number of Contacts : 4 4 4 4
LED Type : GS8208 GS8208 GS8208 GS8208
Copper Quantity : 3 Oz
Temperature, Operating, Maximum : 70°C
Temperature, Operating, Minimum : -40°C
Agency Ratings : UL - E489028, CE, RoHS
PCB Width : 10mm 10mm 12mm 12mm
Maximum Recommended Length : 5 meters 5 meters 5 meters (power injection may be required) 5 meters (power injection may be required)
Viewing Angle : 120 degree
Adhesion : 3M 300MP
Wavelength A : 620 ~ 625nm
Wavelength B : 515 ~ 520nm
Wavelength C : 460 ~ 465nm
Wavelength D : N/A
Data Transmission Speed : 800 kHZ
Refresh Rate : 30 FPS
Bit Rate : 8bits data transfer, 12bits in GAMMA correction of PWM display
Data Clock Frequency : N/A
PWM Dimming Frequency : 8 KHZ

DOWNLOADS

  1. Specification Sheet

  2. UL Certificate of Compliance

*nominal lifetime - dependent on installation location