Pixel FlexLED 12V RGB High Frequency Individual Chip Control

48 & 72 & 96 LED/Meter RGB PixelFlex LED Tape in 12V DC

A worlds first! Pixel FlexLED individually controlled and individually cuttable in 12VDC.
This Pixel FlexLED operating 12 VDC allows for longer runs of LED while still allowing for dazzling effects and endless possibilities.
Control these strips with our PixlArt 416 controller via ArtNet or sACN data signals.
Suitable for on-camera use and flicker-free up to 240 fps at most camera settings. 8KHZ operating frequency.

Pixel Product Installation Notes:

• The PWM frequency (dimming frequency) is baked into the pixel and cannot be changed.  You must ensure you choose the right pixel strip for your application.  If you are unsure of what camera settings are going to be in use, it is best to go with high frequency pixel tape (8khz or higher / GS8208 or APA102)
• Avoid voltage drop by positioning a power supply close to the LED strip and/or powering the LED strip from multiple locations (or via multiple power supplies)
• The power supply that is providing power to the controller (PixlArt416) does not need to be the same power supply that is powering the LED strip.
• During testing ensure that the pixel strip is receiving the required voltage by doing a volt meter test at the contact pads of the LED strip.

Soldering Guidelines:

Soldering iron should be between 360°C and 372°C.  Please ensure not to heat each solder pad for longer than 3 seconds otherwise separation of the solder pads can occur.

Other Notes:

• Indoor and weatherproof strips have 3M double-sided tape on the back which makes installation as easy as peel n stick.
• Waterproof strips require mounting via silicone glue or mechanical hardware
• Controller, power supply and extension cables are sold separately based on your project
• Quantity discounts available
• Custom colour temperatures, pixel densities, and PCB colour are available
• Please contact us for more information

SPECIFICATIONS - INDOOR PRODUCT 

Product Type	:	48 LED/meter	72 LED/meter	96 LED/meter
Product Code	:	I12VRGB240GS8208-B	I12VRGB360GS8208-B	I12VRGB480GS8208-B
CRI	:	N/A	N/A	N/A
Kelvin	:	N/A	N/A	N/A
PCB Color	:	Black	Black	Black
Current, Rating	:	0.6 A / meter	0.9 A / meter	1.2 A / meter
Nominal Voltage	:	12 VDC	12 VDC	12 VDC
Voltage Range	:	10~ 14 VDC	10 ~ 14 VDC	10 ~ 14 VDC
Wattage	:	6.5 W / meter	9.8 W / meter	13 W / meter
CC / CV	:	Constant Voltage	Constant Voltage	Constant Voltage
IP Rating	:	IP43	IP43	IP43
Lumens @ Full	:	750 lm / meter	1125 lm / meter	1500 lm / meter
Lumen / Watt	:	75	75	75
Lifetime*	:	40,000 hours	40,000 hours	40,000 hours
Cutting Length	:	2.1cm, Individual LED	1.4cm, Individual LED	1cm, Individual LED
LED Quantity	:	48 LED / meter	72 LED / meter	96 LED / meter
Number of Contacts	:	4	4	4
LED Type	:	GS-8208	GS-8208	GS-8208
Copper Quantity	:	3 Oz.	3 Oz.	3 Oz.
Temperature, Operating, Maximum	:	70 C	70 C	70 C
Temperature, Operating, Minimum	:	-40 C	-40 C	-40 C
Agency Ratings	:	UL - E489028, CE, RoHS	UL - E489028, CE, RoHS	UL - E489028, CE, RoHS
PCB Width	:	12 MM	12 MM	12 MM
Maximum Recommended Length	:	5 meters	5 meters	5 meters
Viewing Angle	:	120 degree	120 degree	120 degree
Adhesion	:	3M 300MP	3M 300MP	3M 300MP
Wavelength A	:	620 ~ 625nm	620 ~ 625nm	620 ~ 625nm
Wavelength B	:	515 ~ 520nm	515 ~ 520nm	515 ~ 520nm
Wavelength C	:	460 ~ 465nm	460 ~ 465nm	460 ~ 465nm
Wavelength D	:	N/A	N/A	N/A
Data Transmission Speed	:	800 kHZ	800 kHZ	800 kHZ
Refresh Rate	:	30 FPS	30 FPS	30 FPS
Bit Rate	:	48 Bit	48 Bit	48 Bit
Data Clock Frequency	:	N/A	N/A	N/A
PWM Dimming Frequency	:	8 KHZ	8 KHZ	8 KHZ

DOWNLOADS

1. Specification Sheet

2. UL Certificate of Compliance

*nominal lifetime - dependent on installation location

Accessories