Skip to content

Dodici-LED DMX - 12 Channel Dimmer

by MossLED
Availability: Translation missing: en.general.icons.icon_check_circle icon 40 in stock, ready to be shipped

Introducing our most advanced standalone DMX Controller ever

 - now with NEW PROTECT-A-FET technology -

Please set PWM frequency to 10kHz for Flicker-Free operation at most camera settings. 
2020 V1.1 firmware allows RDM to adjust PWM Frequency as well as default PWM Frequency @ 10khz.

Building off of the successes from the Cinque-LED DMX dimmer, we are now introducing a 12-channel version of the controller.  It features the same high precision dimming from 0 - 100% with smooth low-end dimming.  It includes Protect-A-Fet protection on each output channel allowing for short circuit protection on each dimming channel.  This ensures that if there is an accidental short on one of the outputs, a quick power cycle of the unit will allow for continued use AND no internal damage will result.

The Dodici-LED Dimmer has all the features our film, television, and theatrical friends have been asking for. It is an extremely durable metal, rugged housing with professional-grade XLR 5-Pin In/Out and RJ45 In/Out for DMX signal. The terminal blocks used for the input have two spaces for Voltage + and two spaces for GND which allow for the huge current capability this unit has 12 X 5A = 60 AMPS of power!

This unit also has an easy-to-read LED display for setting address and manual mode settings. The Dodici-LED DMX Dimmer has 8 bit and 16 bit resolution modes as well as output PWM frequency adjustable settings from 500Hz to 35kHz.  On top of all of that there is ALSO a gamma curve value which adjusts the dimming curve of the unit so you can have an extremely high resolution low end or an extremely high resolution high end. It's entirely up to you!

The Dodici-LED DMX Dimmer is BY FAR the most advanced standalone DMX Decoder controller unit on the market, EVER!

This controller can be used with all of our FlexLED Tape products and Modules

  • This unit converts DMX-512/1990 standard digital signal into 12 dimmable channels.
  • Uses RJ45 Ethernet or 5-pin XLR connectors to control LEDs via any lighting console or through computer software.
  • Can create over 16 million colors when used with our Colorful (RGBA or RGBW or RGB OR Bi-Color OR White) FlexLED Tape
  • LED Interface provides easy functionality for DMX addressing as well as full manual mode & test control options.

Technical Specifications

Output Current (A)


12 CH @ 5A/CH = Max 60A

Output Power (W)


720W @ 12V / 1440W @ 24V

Supply Voltage


12V - 24V DC

Size (inches)


 7.6L x 6.5W X 1.63H

Working Temperature


-20°C to + 50 °C




PWM Frequency


500Hz to 35kHz

IP Rating



Flicker Free



Bit Rate


8 Bit & 16 Bit



  1. UL Certificate of Compliance
  2.  Dodici Manual V1.1
  3.  Dodici Installation Instructions
  4.  RoHS Certificate
  5.  CE Certificate of Conformity
  6.  EU Certificate of Conformity