Save Liquid error (snippets/product-badge line 32): Computation results in '-Infinity'%
$920.53
| /
Qty
Discount
5
5%
10
10%
21
15%
The more you buy, the more you save!
${{amount}}
NetBox is a robust, all-in-one IP65 solution that delivers power, data, configuration, and monitoring to your QuikBeam lights. Its 4-output design enables remote PrepBox functionality.
With PrepBox functionality, you can assign IP or DMX addresses in seconds, set fixtures to Blue Mode, and configure dimming and color across multiple units without a controller, enabling individual configuration and quick selection of several lights, making prepping quicker and more efficient.
What is the NetBox?
With a PoE++ switch and integrated PrepBox functionality, the IP65 rated NetBox delivers both power and data through a single cable to your QuikBeam. With four PoE++ outputs, it can power or charge up to four QuikBeams at the same time, simplifying setups and reducing cabling.
Why using a NetBox?
NetBox is designed to work with multiple QuikBeam lights and brings major workflow advantages. Equipped with PrepBox functionality, it adds flexibility and saves valuable time during setup and configuration. Plus, due to its PoE capability, it supports cable runs of up to 100 m and can directly power QuikBeam lights via PoE, with or without a battery inserted. When a battery is inserted, it can be charged while the light is connected. It enables quick setup of Ethernet, DMX, and fixture settings for up to four lights simultaneously.
How to use a NetBox?
Connect your QuikBeams via the EtherCON ports and power the NetBox using a True1 cable. PrepBox functionality is delivered directly over the Ethernet cables, allowing configuration, App pairing, and software adjustments even when lights are up to 100 m away. IP65-rated and equipped with a retractable rigging mechanism, NetBox is suitable for truss, pipe, or fixed installations.
NetBox or PowerInjector?
PowerInjector is the right choice when you want to add power and data to a single QuikBeam via PoE. It’s a fast, lightweight solution focused on delivering reliable power and data through one cable.
NetBox extends this option by adding full PrepBox functionality. In addition to powering up to four QuikBeams, it allows you to prep, configure, and monitor multiple lights at once, and is IP65-rated for reliable use in demanding environments.
Technical Specifications
Order Code
AST-NETBX
Battery Runtime
12 h
Battery Lifetime
80 % after 400 cycles
Charging Time (nominal)
3 h 30 min
AC Input
100 – 240 VAC, 50/60 Hertz, 115 VAC – 5.2 A / 230 VAC – 2.9 A
AC Connector
PowerCON TRUE1 IN / OUT
DC Output
4 x 55 VDC – 1.67 A
Data Input/Output
Ethernet
Fixture Output
4 x EtherCON PoE++
Data Sockets
EtherCON IN/OUT
Ethernet Port Speed
100 Mbit/s
Fail-safe Ethernet Relay
Yes
IP Rating unwired
IP 65
IP Rating wired
IP 65
Ambient Operating Temperature
0 – 40 °C / 32 – 104 °F
Weight
2.4 kg / 5.29 lbs
Dimensions (L x W x D)
226 mm x 145 mm x 55.5 mm / 8.90" x 5.75" x 2.19"
Mounting Options
3/8" – 16 UNC, Ø 12.5 mm hole
All specifications provided are typical values and may be subject to change without prior notice.
