High Output Color Changing RGB LED strips
Our RGB LED ribbon is available in two different densities, 60 LED/meter, and 96 LED/meter. Both versions utilize the same high brightness and high efficiency 5050 chip. Both come standard with 3M 200MP double-sided adhesive that makes installation as easy a peel n' stick. Installing onto a clean, dry surface in room temperature ensures the product will stay where you install it for many years to come.
The 60 LED/meter is ideally suited for most applications, however when very bright RGB output is required, the 96 LED/meter is available and produces a 60% increase in brightness over the 60 LED/meter.
The 60 LED/meter at 5 meters falls into a class 2 specification drawing only 14.4 watts / meter (72 watts when powered from both ends) (64.3 watts when powered from one end)
The 96 LED/meter at 5 meters falls above a class 2 specification drawing 23 watts / meter (115 watts when powered from both ends) (100 watts when powered from one end)
Suitable for residential, television, industrial, and commercial applications or anywhere RGB LED lighting is required.
*Controller, Power supply and Extension Cables sold separately
SPECIFICATIONS - INDOOR PRODUCT
|Product Type||:||RGB 60||RGB 96|
|Kelvin||:||Color Changing||Color Changing|
|Current, Rating||:||0.6 A / meter||0.96 A / meter|
|Voltage||:||24 VDC||24 VDC|
|Wattage||:||14.4 W / meter||23 W / meter|
|Wattage @ 5 Meters (Powered at one end)||64.3 W||100 W|
|Wattage @ 5 Meters (Powered at both ends)||72 W||115 W|
|CC / CV||:||Constant Voltage||Constant Voltage|
|IP Rating||:||IP 43||IP43|
|Lumens @ Full||:||1000 lm / meter||1600 lm / meter|
|Lumen / Watt||:||69||69|
|Lifetime*||:||50,000 hours||50,000 hours|
|Cutting Length||:||10 CM||6.25 CM|
|LED Quantity||:||60 LED / meter||96 LED / meter|
|Number of Contacts||:||4||4|
|Copper Quantity||:||3 Oz.||3 Oz.|
|Temperature, Operating, Maximum||:||70 C||70 C|
|Temperature, Operating, Minimum||:||-40 C||-40 C|
|Agency Ratings||:||UL - E489028, CE, RoHS||UL - E489028, CE, RoHS|
|Maximum Recommended Length||:||10 meters||5 meters|
|Adhesion||:||200MP 3M||200MP 3M|
|Wavelength A Red||:||620 ~ 625nm||620 ~ 625nm|
|Wavelength B Green||:||515 ~ 520nm||515 ~ 520nm|
|Wavelength C Blue||:||465 ~ 470nm||465 ~ 470nm|
*nominal lifetime - dependent on installation location
- Follow all instructions on bag label
- Install indoor product in dry locations only
- Weatherproof is rated at IP67 and Waterproof is rated at IP68.
- Waterproof FlexLED must be mounted using silicone (not provided)
Soldering iron should be between 360°C and 372°C. Please ensure not to heat each solder pad for longer than 3 seconds otherwise separation of the solder pads can occur.