LED Luminaires

This beam shaping device can be clipped onto the AX9 to cut off spill light and define the beam. It also helps to avoid glare when viewing it from...

A new range of LED fixtures designed by West Coast Illumination & Moss LED. 5 different sizes and 5 different LED Engines. Bi-Colour (3000k - ...

New for 2018! A new range of LED fixtures designed by West Coast Illumination & Moss LED. 5 different sizes and 5 different LED Engines. Bi-Co...

for Astera Helios 2021 New Version - SNAPBAG® 3 Tubes for Astera Helios SBAAT22 - ASTERA EXCLUSIVE PRODUCT For 3 ASTERA Helios Tubes, including Air...

For ASTERA Helios Tubes. including SNAPGRID and Carry Bag.  Fits on SNAPBAG® Astera 2' x 1' incl. Carry Bag 40° Degree Beam Angle Installed Size ...

It's the same as Titan, only BIGGER! Please note we are not able to ship this product to the United States After the enormous success of the ...

It's the same as Titan, only BIGGER! Please note we are not able to ship this product to the United States After the enormous success of the ...

Charge or install 8 PixelBricks.  Also allows wired data transfer from DMX, Artnet and sACN sources.  Comes with PowerCon AC cable and 8 short DC ...

Astera Accessory kit for PixelBrick set of 8 Kit includes: Top Layer: 10 - brickmount 4 - trackpins 6 - 200mm power/data combo cable 2 - 5m power/d...

Slide into the PixelBrick's side to connect mounting tools through 1/4"-20 and M5 threads. Set of 8

Connect 2 PixelBricks to each other's side. Set of 8

Comes with the PixelBrick and acts as a stand and hanging mount with airline track and 1/4” thread.

Connect 2 PixelBricks, angle them to spread their beam and to create shapes.

Connect 2 PixelBricks, tilt them to spread their beam and to create shapes.

Accessory Case for PixelBrick - Case and Foam insert only Sturdy plastic case to carry additional accessories to install and wire 8 PixelBricks.

Sturdy charging and transportation case with 2 wheels and 3 handles to carry 8 PixelBricks.  The included power supply can charge 8 units from one ...

Titan LED Engine, 15W, CRMX + Wired DMX Say hello to Astera's next-generation multi-purpose light. In addition to being a battery-powered uplight a...

Foldable Stand for AX1, Titan and Helios tubes. Sits very close to the floor for low angle shooting. The three legs fold into each other for...

For Suspending AX1 PixelTube*, Helios Tube, Titan Tube, Hyperion Tube Also for securing tubes via safety cable *only newer AX1 PixelTubes that ...

Charging plate for 4 X AX5 TriplePars.

AX3 LightDrop Wall Washer Filter

AX3 LightDrop 120° Flood Filter

AX3 LightDrop 30° Flood Filter

Description: Charging case allows you to carry eight (8) Helios Tubes.  Power Box is included

For 3 ASTERA Helios Tubes.  Fits on SNAPBAG® Astera 2' x 2' incl. Carry Bag.   40° Degree Beam Angle Installed Size 60 x 54 x 11 cm24 x 21 x 4 in

NYX Empty Case.  Designed to transport the following: 8 NYX Bulbs 1 PowerStation 8 CupBouncers1 1 48VDC PSU

Includes single stud fitting to connect the PowerStation's Airline Track.

The TrackPin Baby Pin with Single-Stud Fitting from Astera works with airline track (L-track) to create strong and secure tie-down anchor points fo...

The E27 Socket for FP5 LED Bulbs with Single-Stud Fitting from Astera provides a non-powered E27 socket for NYX LED bulbs with a single-stud fittin...

Key Features Hold 4 Wingplates Parallel to Cross Plate 5/8" Baby Pin AX1-WP Wingplates Purchased Separately AX1-H Metal Holders Purchased Se...

Key Features Mounting to Truss & Other Structures Compatible with FP1, FP2, FP3 Tubes Also Works with Spax Screws This Metal Holder for Mo...

The Astera WingPlate for Two AX1 Tube Holders can be used to hang or mount tubes, as well as to create shapes such as squares or triangles. The Win...

40° Titan/AX1  Fits on SNAPBAG® Astera 4 'x 2' incl. Carry Bag  

For 3 ASTERA Helios Tubes, including one front diffusion MAGIC cloth and Carry Bag Requires manufacturer Part WingPlate (FP1-WP)

Charging plate for 8 X AX5 TriplePars.   DOWNLOADS  Datasheet  Manual

Required device to send wired DMX to Hyperion Tube.  Also useful for Titan Tube and Helios Tube if no Titan PowerBox is available to work with mult...

The PowerBox can charge Helios and Titan Tubes inside their respective case. When taken out of the case they can also be used to hard-wire tubes fo...

Titan/AX1 1 Tubes The SNAPBAG® is the perfect accompaniment for a three 40,7“, 1030mm Astera AX or Titan Tubes including one front diffusion MAGIC ...

Titan/AX1 1 Tubes New for 2021! Designed for 1 ASTERA Titan/AX1 Tube, including Airline Track and Pin, one front diffusion MAGIC cloth and carry ba...

The Astera FP2-SET Helio 8 Tube Kit has all the features of the popular Titan Tube while offering a smaller format. It allows mounting in areas whe...

Please note we are not able to ship this product to the United States 45W RGBAW  (3x 15W)  – 13° Beam Angle Optimized for a fast return of investme...

Please note we are not able to ship this product to the United States For charging 8 TitanTubes at the same time. Removable power box with 8 DC ca...

Please note we are not able to ship this product to the United States Comes with power cord and all AX1 accessories (8 x stands, 16 x holders, 16 x...