Universal External Rechargeable Battery - BP100.
Port III Output Voltage Setup
The battery Port III can output 3 different regulated voltages: 16V, 19V, 24V. This port can be used to power our FlexLED strips, LuxLine stix, ML Pads, and laptop notebook computers with the output cable and different connector tips. Please set the port III output voltage to match the voltage of your LED product.
There are 3 LED lights to indicate port III output voltages. When you plug the output cord to the port III, one LED will light to show you current active output voltage.
To set up or change Port III's output voltage:
There is a small slide switch that allows you to adjust the output voltage between 16V, 19V, and 24V. Simply adjust the switch to the selected output voltage that you require and the battery will regulate itself to output that specific voltage.
High capacity: This battery capacity is 96 Watt-hour ( or 26400 mAh). If we rate this battery capacity like some other brand external batteries on market). We suggest using "Watt-hour" instead of "Amp-hour" to compare capacities of different batteries. Watt-hour or Wh, is a more accurate unit to show the power capacity than Amp-. Hour (Ah) that was used before. The Watt-Hour unit means the wattage that the battery can provide within one hour.
This Universal External Lithium Rechargeable Battery Pack can provide power for our FlexLED strips, LuxLine stix, ML Pads, and module as well as laptop computers, digital cameras, digital photo frames, PDAs, cell phones, DVD players.
1.This battery has 3 output ports:
- Output I is a 5V USB port that can be used to power or charge cell phones, iPhone/iPod/iPod Touch, MP3/MP4 players, PDAs and any device that can be charged from a USB port (USB power cable not included).
- Port II output nominal voltage is 11.1V (Range from 9V ~ 12.6V). This port power comes directly from battery cells without voltage regulation. When the battery is fully charged, its voltage is 12.6V. Output voltage will then decrease gradually. Most of the time, the output voltage will be around 10V ~ 11V ( nominal voltage is 11.1V). When the voltage drops to 9V, the port will shut off and stop providing power.
- Port III can output 3 different voltages: 16V, 19V, 24V. This port can be used to power all of our 24V LED products as well as many different laptop notebook computers and other electronic devices that require stable voltage.
Wide range input voltage:
This battery can be charged from 12V to 24V DC power. It may use your current laptop AC power adapter as a charger if it has a 5.5x2.1mm connector. In this case, there is no need to carry an extra charger when you travel.
|Input Charging Port:
||Input Voltage Range: DC 12 ~ 24V. Connector Size: 5.5 x 2.1mm
||Port I: 5V USB Port; Maximum Output Current: 2.1A
Port II: Nominal Output Voltage 11.1V
Output Voltage Range 9V ~ 12.6V
Output Connector Size: 3.5 x 1.35mm;
>Maximum Output Current: 5A
Output Voltage: 16V, 19V or 24V selectable
Output Connector Size: 5.5 x 2.5mm
Maximum Output Current: 4.0A
|Charging time /Temperature
||4-6 hours / 0C- 45 C
||186 x 114 x 22.5mm ( or 7.5" x 4.5" x 0.9")
||621g ( or 1.4 lb)
||4 level LED indicator
|Built-in Protection Circuit:
-Over-charge ; Over-discharge; Over current ;Over temperature
- Short circuit protection
- 20C 60 C
- 20C40 C
The battery pack comes with one BP100 battery + 2 output cables + AC Charger
How to use the battery:
<1>Charge the battery: This battery can be charged from 100V ~ 240V 50Hz/60Hz AC power source with the battery AC charger.
<2> Decide Battery Output Voltage: The battery output voltage should be the same as the LED strips you are powering (whether they are 12V or 24V).