FREE SHIPPING IN CANADA OVER $199 - 1-800-924-1585 - INFO@MOSSLED.COM
FREE SHIPPING IN CANADA OVER $199 - 1-800-924-1585 - INFO@MOSSLED.COM
Skip to content

FlexLED RGB 24V - Temporary Install Grade

SKU I24VRGB3005050-TIG
by MossLED
Save 43%
Original Price $120.55
Current Price $68.89
IP Rating
Pixel Density
Connector Type
Availability: Translation missing: en.general.icons.icon_check_circle icon 36 in stock, ready to be shipped

60 LED/meter, high brightness and high efficiency 5050 chips.Standard 3M 200MP double-sided adhesive that makes installation as easy a peel n' stick. Installing onto a clean, dry surface in room temperature ensures the product will stay where you install it for many years to come.

This cost friendly RGB LED is designed to be used for temporary installs such as trade shows or limited run productions. It is not to be used for permanent high-use installations. Warranty on all Temporary Install Grade LED is for 2,000 hours of use.

The 60 LED/meter at 5 meters falls into a class 2 specification drawing only 14.4 watts / meter (72 watts when powered from both ends) (64.3 watts when powered from one end)


Pricing is for 5 meter length

*Controller, Power supply and Extension Cables sold separately


SPECIFICATIONS - INDOOR PRODUCT

Product Type : RGB 60
Kelvin : Color Changing
PCB Color : White
Current, Rating : 0.6 A / meter
Voltage : 24 VDC
Wattage : 14.4 W / meter
Wattage @ 5 Meters (Powered at one end) 64.3 W
Wattage @ 5 Meters (Powered at both ends) 72 W
CC / CV : Constant Voltage
IP Rating : IP 43
Lumens @ Full : 1000 lm / meter
Lumen / Watt : 69
Lifetime* : 2,000 hours
Cutting Length : 10 CM
LED Quantity : 60 LED / meter
Number of Contacts : 4
LED Type : 5050
Copper Quantity : 3 Oz.
Temperature, Operating, Maximum : 70 C
Temperature, Operating, Minimum : -40 C
Agency Ratings : UL - E489028, CE, RoHS
PCB Width : 10MM
Maximum Recommended Length : 10 meters
Viewing Angle : 120
Adhesion : 200MP 3M
Wavelength A Red : 620 ~ 625nm
Wavelength B Green : 515 ~ 520nm
Wavelength C Blue : 465 ~ 470nm
Standard length : 5m

DOWNLOADS

  1. Specification Sheet

  2. UL Certificate of Compliance

*nominal lifetime - dependent on installation location

Installation Notes

  • Follow all instructions on bag label
  • Install indoor product in dry locations only
  • Weatherproof is rated at IP67 and Waterproof is rated at IP68.
  • Waterproof FlexLED must be mounted using silicone (not provided)


Soldering Guidelines:
Soldering iron should be between 360°C and 372°C. Please ensure not to heat each solder pad for longer than 3 seconds otherwise separation of the solder pads can occur.