60 LED/meter, high brightness and high efficiency 5050 chips.Standard 3M 200MP double-sided adhesive that makes installation as easy a peel n' stick. Installing onto a clean, dry surface in room temperature ensures the product will stay where you install it for many years to come.
This cost friendly RGB LED is designed to be used for temporary installs such as trade shows or limited run productions. It is not to be used for permanent high-use installations. Warranty on all Temporary Install Grade LED is for 2,000 hours of use.
The 60 LED/meter at 5 meters falls into a class 2 specification drawing only 14.4 watts / meter (72 watts when powered from both ends) (64.3 watts when powered from one end)
Pricing is for 5 meter length
*Controller, Power supply and Extension Cables sold separately
SPECIFICATIONS - INDOOR PRODUCT
| Product Type |
: |
RGB 60 |
| Kelvin |
: |
Color Changing |
| PCB Color |
: |
White |
| Current, Rating |
: |
0.6 A / meter |
| Voltage |
: |
24 VDC |
| Wattage |
: |
14.4 W / meter |
|
Wattage @ 5 Meters (Powered at one end)
|
|
64.3 W |
|
Wattage @ 5 Meters (Powered at both ends)
|
|
72 W |
| CC / CV |
: |
Constant Voltage |
| IP Rating |
: |
IP 43 |
| Lumens @ Full |
: |
1000 lm / meter |
| Lumen / Watt |
: |
69 |
| Lifetime* |
: |
2,000 hours |
| Cutting Length |
: |
10 CM |
| LED Quantity |
: |
60 LED / meter |
| Number of Contacts |
: |
4 |
| LED Type |
: |
5050 |
| Copper Quantity |
: |
3 Oz. |
| Temperature, Operating, Maximum |
: |
70 C |
| Temperature, Operating, Minimum |
: |
-40 C |
| Agency Ratings |
: |
UL - E489028, CE, RoHS |
| PCB Width |
: |
10MM |
| Maximum Recommended Length |
: |
10 meters |
| Viewing Angle |
: |
120 |
| Adhesion |
: |
200MP 3M |
| Wavelength A Red |
: |
620 ~ 625nm |
| Wavelength B Green |
: |
515 ~ 520nm |
| Wavelength C Blue |
: |
465 ~ 470nm |
| Standard length |
: |
5m |
DOWNLOADS
-
Specification Sheet
- UL Certificate of Compliance
*nominal lifetime - dependent on installation location
Installation Notes
-
Follow all instructions on bag label
- Install indoor product in dry locations only
- Weatherproof is rated at IP67 and Waterproof is rated at IP68.
-
Waterproof FlexLED must be mounted using silicone (not provided)
Soldering Guidelines:
Soldering iron should be between 360°C and 372°C. Please ensure not to heat each solder pad for longer than 3 seconds otherwise separation of the solder pads can occur.
